Leírás
Interface Module for TPS-6, TPS-6X-DS, TPS-6X-DS-LP, & TPMC-9.
Provides a single-wire connection for TPS-6 and TPMC-9 Touchpanels, and for the TPS-6X-DS Docking Station. Mounts in a single-gang wall box, or to any flat surface using its included bracket. Includes inserts to match black or white decorator style faceplates.
The TPS-6X-IMCW is the interface module that is included with the Isys™ TPS-6 and TPMC-9 Tilt Touchpanels, TPS-6X Wireless Touchpanel, and TPS-6X-DS Docking Station. It provides a convenient pluggable connection via a single 10-pin RJ50 jack on its front panel. On the rear are connections for Cresnet®, Ethernet, balanced or unbalanced video, and a choice of Cresnet or local DC power. An additional DC power jack is included on the front panel to simplify the connection of a local power supply in a typical wall mount application.
Using the hardware provided, the TPS-6X-IMCW can be mounted in a standard 1-gang electrical box, to a flat surface, or to a 19-inch rack-rail. Multiple TPS-6X-IMCW interface modules may be purchased individually and installed as part of a complete system to provide multiple touchpanel connection locations.
Key Features
- Single-wire connection for the TPS-6X-DS, TPS-6, and TPMC-9
- Mounts in a single-gang wall box
- Includes inserts to match black or white faceplates
- Surface mount and rack-rail installation options included
- Wired Ethernet and Cresnet control system connections
- Balanced or coaxial video input
- Versatile powering options
| Connectors – Front Panel | ||
| TO PANEL | (1) 10-pin RJ50 female; Connection for TPS-6 or TPMC-9 touchpanel, or TPS-6X-DS docking station |
|
| PWR 24VDC .75A | (1) 2.1mm barrel DC power jack; 24 Volt DC power input; PW-2407WU power pack included |
|
| Connectors – Rear Panel | ||
| PWR 24VDC .75A | (1) 2.1mm barrel DC power jack; 24 Volt DC power input; PW-2407WU power pack included |
|
| NET | (1) 4-pin 3.5mm detachable terminal block; Cresnet slave port, connects to Cresnet control network |
|
| BAL VIDEO IN | (1) 3-pin 3.5mm detachable terminal block; Balanced composite video input; Input Impedance: 100 ohms nominal; Input Level: 1 Vp-p nominal, 1.5 Vp-p maximum; Maximum DC Offset: ±2 Volts; Connects to any Crestron CAT5 Video Out port via CresCAT cable |
|
| UNBL VIDEO IN | (1) 2-pin 3.5mm detachable terminal block; Unbalanced composite video input; Input Impedance: 75 ohm nominal; Input Level: 1 Vp-p nominal, 1.5 Vp-p maximum; Maximum DC Offset: ±2 Volts; Connects to any conventional coax video source; Note: Balanced and unbalanced video inputs are mutually exclusive |
|
| LAN | (1) 8-wire RJ45, 10/100BaseT Ethernet port | |
| Ground | (1) Flying lead, grounding wire | |
| Indicators | ||
| PWR | (green) Indicates DC power supplied from Cresnet network or DC power pack | |
| Power Requirements | ||
| Power Pack | 0.75 Amps @ 24 Volts DC; 100-240 Volts AC, 50/60 Hz power pack, model PW-2407WU included |
|
| Cresnet Power Usage | 0.5 Watt (0.02 Amps @ 24 Volts DC), module only; 18 Watts (0.75 Amps @ 24 Volts DC) with TPS-6X or TPS-6XNL connected; 16 Watts (0.67 Amps @ 24 Volts DC) with TPS-6 or TPMC-9 connected |
|
| Note: May be powered by Power Pack or Cresnet network power, not both. | ||
| Environmental | ||
| Temperature | 32° to 112°F (0° to 45°C) | |
| Humidity | 10% to 90% RH (non-condensing) | |
| Enclosure | ||
| Construction | Metal, black matte powder coat finish, includes (2) metal decorator style inserts to allow choice of black or white front panel | |
| Flush Wall Mount | 1-gang mountable in a standard electrical box (2.5 inch deep minimum); requires decorator style faceplate (not included) | |
| Surface Mount | Surface mount bracket included | |
| Rack Mount | Mountable to a single 19-inch EIA rack rail | |
| Dimensions | ||
| Height | 4.11 in (105 mm) | |
| Width | 1.72 in (44 mm); 1.93 in (49 mm) w/surface mount bracket |
|
| Depth | 1.43 in (37 mm); 1.49 in (38 mm) w/surface mount bracket |
|
| Weight | ||
| 5.7 oz (162 g); 8.2 oz (232 g) with bracket |
||
Értékelések
Még nincsenek értékelések.